Best Petrol Hedge Trimmers

10 Best Petrol Hedge Trimmers Reviews in 2021

For professionals and individuals with a large garden, the purchase of a petrol hedge trimmer is very often essential. You still have to choose the right model.

This buying guide is here to help you choose among the best petrol hedge trimmers around to suit your budget!

[amazon bestseller =”Petrol Hedge Trimmer” template =”table”]

Mcculloch Ergolite 6028: The Best Professional Petrol Hedge Trimmer

Mcculloch Ergolite 6028

The McCulloch ErgoLite 6028 can easily be classified in the category of professional petrol hedge trimmer, because it is a powerful, ergonomic and quiet device. In particular, it has the SoftStart starting aid system, as well as a priming pump to easily start its powerful engine. The latter offers a high cutting speed, by driving a double blade system to make your cut both efficient and fast. Here are the characteristic points that we noted on this hedge trimmer.

The engine : The McCulloch ErgoLite 6028 petrol hedge trimmer is fitted with a 21.7 cc two-stroke engine. It is a powerful motor capable of providing a cutting speed of 4050 cut / min, but also silent by design with a sound pressure level close to 100 dB (A) at the level of your ears, and above all ergonomic , because the level of vibration that you will be able to feel on the handle is 3.5 m / s² forward and 4.4 m / s² rearward.

Starting : To help you start the ErgoLite engine, McCulloch has equipped it with SoftStart technology. It is a system that reduces the resistance of the thrower rope by 40%. You will therefore find it very easy to pull it. The hedge trimmer also has the Primer system, a manual pump that injects fuel into the carburetor, which also makes it easier to start the engine. Finally, to reduce the risk of flooding the engine and simplify the next restart, the McCulloch ErgoLite 6028 is equipped with a STOP button with automatic return.

The cutter bar system : The McCulloch ErgoLite 6028 is equipped with two 45cm long movable blades, which move separately to give you crisp and perfect cutting results. The wide tine spacing (28 mm) allows you to work on thick hedges and large branches without any difficulty. Note that these hardened steel blades are very well sharpened, because they have been laser cut.

Ergonomics : With the ErgoLite, you have an ergonomic handle, designed with soft materials to give you the greatest comfort when using the hedge trimmer. This handle is also anti-vibration and its rear part can be rotated so that you have the best positioning when pruning and thus improve the general grip of the device. The 30 cl tank is clearly visible, which allows you to have an eye on the level of fuel present.

GT Garden

GT Garden

If you need to prune or cut hedges or branches high or deep, opt for this GT Garden thermal perched hedge trimmer. In fact, you have a 3.30 m pole so that you can reach places that are difficult to access. Among other things, this French brand has applied itself to offering you a product that is both light and easy to handle, and since it is locally produced, you have excellent after-sales service. Focus on the essential points characterizing this GT Garden hedge trimmer.

The pole : Thanks to the presence of the telescopic pole, you can extend the hedge trimmer up to 3 m, 3.30 m more exactly if you count to the end of the blade. So you will no longer need to be acrobats on a ladder to cut your hedge or pruning.

The cutter bar system : The GT Garden hedge trimmer is equipped with 45 cm long blades. They are able to cut a hedge of medium thickness, because the spacing of their teeth is 24 mm. We particularly appreciate the fact that we can orient the cutter bar system in all directions, both horizontally and vertically, so that you have access to the most difficult places.

The engine : The GT Garden cutting blades are driven by a powerful and robust engine with 52 cc of displacement and 3 HP (2.2 kW) of power, almost double what most conventional hedge trimmers offer. So you can tackle tough jobs and high volume. Note, however, that this large displacement implies a significant weight.

Quality : The GT Garden hedge trimmer benefits from a 2-year manufacturer’s warranty, proof of the seriousness of the French brand in the quality of manufacture and finish of its products. After-sales service is also available throughout France. Among other things, the device is CE and TÜV approved (Technischer Überwachungsverein) a German technical inspection association.

Starting : To assist you in starting the engine, the GT Garden pole hedge trimmer is equipped with a priming pump. So all you have to do is push down on this pump to reduce the number of rope pulls and by extension the effort you have to make to start the engine.

Greencut GHT-260: A Cheap But Reliable Thermal Hedge Trimmer

Greencut GHT-260

If you want to buy a cheap thermal hedge trimmer, we offer you the GHT-260 from Greencut. It is a model equipped with a 26 cm3 engine whose starting is assisted by an Easy-Start system and CDI ignition. Its cutter bar is a double-cut, interchangeable system, 60 cm long. Discover without delay the characteristic elements of this lowcost thermal hedge trimmer.

The design : The exhaust is an essential element for any heat engine, but it often happens that the smoke coming out of it is annoying. This is why Greencut came up with the idea of ​​moving this exhaust outlet towards the front of the hedge trimmer so that the fumes given off by the engine cannot reach you. Note also that the fuel tank has a non-drip closure, completely hermetic

The engine : The GHT-260 model is equipped with a 2-stroke gasoline engine, even from the Greencut brand. Its 26 cm3 displacement develops a correct power of 1.9 CV. Its special feature is its dual element air filter, which reduces engine wear and damage. This is because when you cut or prune a hedge or shrub, particles, dust and insects may be absorbed by the engine.

Starting : To facilitate the starting of the GHT-260 engine, Greencut has opted for an Easy-Start and a CDI (Capacitive Discharge Ignition) ignition. The latter considerably increases the energy transmitted to the spark plug and is practically foolproof which is really a plus if you don’t use the hedge trimmer often.

Ergonomics and comfort : You have a swivel handle capable of turning at an angle of 180 ° to facilitate the grip of the device even if you make side and vertical cuts. The GHT-260 is also equipped with an anti-vibration system with silent block which guarantees you comfort and reduced fatigue when using the hedge trimmer. Finally you can adapt the power of the engine according to the work you are doing thanks to a power regulator on the handle.

Safety : Several safety points are put in place by Greencut to give you safety when using the GHT-260. At the engine level for example, you have a locking system associated with a safety lock on the throttle. The hedge trimmer is also equipped with a blade cover so you can store it safely.

How To Start A Petrol Hedge Trimmer?

The hedge trimmer is relatively simple as a tool, even a novice will know how to handle it from the first start. However, there are a few rules to follow when using it. Regarding starting for example, thermal models are generally equipped with a launcher, that is to say a T-handle connected to a cable that allows to drive and start the engine when pulled. above.

However, there are models equipped with a starting aid system, also called Softstart, which considerably reduces the effort required to start the engine, but also hedge trimmers equipped with a priming pump, which for its hand injects fuel into the engine to simplify starting.

Important Steps To Start The Petrol Hedge Trimmer:

  • First check that there is fuel in the hedge trimmer tank. Also check the oil level.
  • Place the machine on the ground, in a safe position, making sure to keep the engine vertical. However, do not put your foot on the shaft of the device.
  • Then adjust the throttle by playing on the lock switch
  • Now locate the choke lever, which is normally located at the top and left of the engine, then set it to the closed position.
  • If the model has a primer pump, press it at least five times to reduce the number of string pulls you need to make and make starting easier. If the fuel begins to flow, you will feel the resistance increase. Be careful not to flood the carburetor.
  • Take the starter handle with your right hand and hold the mower with your left hand then pull slowly until you feel a little resistance (the first point of compression). When you feel this resistance, pull back with quick shots and repeat the operation until the engine starts.
  • Put the choke in the full open position after the engine starts, then adjust the engine speed to idle using the throttle lock.

Some remarks when starting:

  • You should know that too much engine oil can cause it to fail.
  • It is also advisable not to use the full length of the starter rope when pulling the starter.
  • Never let go of the handle once you have pulled it, rather accompany it so that it reels in properly.

Once the engine has started, slowly raise your hedge trimmer: you are ready to go.

How To Sharpen A Thermal Hedge Trimmer?

In order for your hedge trimmer to be efficient in its work, you should not wait for its blades to show signs of severe wear before sharpening them. They need to be sharpened regularly every 50 hours or so to keep them performing well in the cut.

First of all, it is necessary to clean the blade, because it retains the sap and resin residues from your last cut. Then disinfect the sharpener to prevent the spread of disease from one tool to another. To do this, use a cloth soaked in methylated spirits.

The rule of thumb for successful sharpening is to file in the direction of the cutting edge, that is, from the inside out. Here are the steps to follow to perform this sharpening of the blades:

  • Position the blades correctly first, either by holding them in a vise, or by holding the hedge trimmer firmly between your legs.
  • Then insert the sharpener between the first teeth so that it follows the angle and the line of the blade, then press down on it making a movement from the inside to the outside.
  • When sharpening, make sure that the sharpener moves in one stroke and make sure that it does not contact the blade when you pull it up.
  • Repeat the operation until you find that the filed surface is clean and shiny. Be careful, however, not to overfile the blade, since it has a wear threshold. Otherwise the material may lose its strength.
  • Then move on to the next blade, repeat the sharpening and proceed in the same way until all the teeth are finished.
  • To complete the job, use a whetstone to remove any burrs on the bottom of the blade. Then spray it with a resin-free spray to prevent rust (especially steel blades).

How To Choose A Thermal Hedge Trimmer?

Trimming or trimming hedges or trees requires a lot of work. Obviously, doing this with a shears will not only take a lot of time, but also considerable physical effort. This is why the purchase of a hedge trimmer seems obvious if we want to make the difference in terms of time, energy and especially in quality of cut. Indeed, such an investment allows you to make your hedges and shrubs look perfect, and get the job done efficiently and quickly. Here are the essentials to know to help you find the one that’s right for you.

The Garden

Before you start any research, the first thing you need to consider is your garden. Indeed, to find the hedge trimmer that is perfect for the latter, you must consider the nature of the hedges, their height and thickness, their accessibility (for example, are they close to a wall or a fence? ) as well as the size of your yard. From this data, you will be able to determine the size and level of power you will need.

The Power

In general, the petrol hedge trimmer models are more powerful than the electric models thanks to their gasoline engine. On the other hand, they are heavier and noisier. The engine power then varies between 0.4 and 1.4 HP and its choice must be based on the type of hedges to be worked. But to put it simply, the more powerful the hedge trimmer, the better the machine can tackle tough jobs and large volumes.

Cutting Length

Cut length generally refers to the length of the blades. The longer blades make it easier to trim hedges evenly, as you have the flexibility to work in depth and linearly. On the other hand, this type of hedge trimmer is difficult to handle, especially in a small space, because it is often heavier and more bulky.

Generally, the blades measure between 40 and 75 cm. While a 45cm blade length is fine for most typical hedges, count more than 50cm if your hedge is taller than usual.

Cutting Capacity

The other characteristic to take into account when talking about a blade is the distance between its teeth, which determines the thickness of the branches that the hedge trimmer is able to cut. For a fine hedge, a cutting capacity of 12 to 16 mm is more than sufficient. For a medium-thick hedge, opt for a cutting capacity of 20 to 25 mm. A distance between the teeth of 26 to 34 mm is necessary for cutting thick hedges.

The Cutting System

By the arrangement of the blade (single or double) we can differentiate two cutting systems. The single blade is characterized by a movable upper blade associated with another fixed one. The hedge trimmer with this cutting system is easier to maneuver, but tends to vibrate as it is used. The double blade on the other hand has two movable blades capable of cutting simultaneously. The work is therefore faster and of better quality.

The Care Of

Sometimes it is necessary to adopt difficult positions in order to be able to prune hedges and shrubs properly. Therefore, favor hedge trimmer models offering excellent handling. Among the most used solutions, the swivel handle allows you to put the hedge trimmer in an optimal position (horizontally and vertically), while the telescopic handle allows you to reach more height with a minimum of effort. There is also the anti-vibration device which helps you to work comfortably for a long time.

The Weight

One of the most important things to consider is the weight of the device. Indeed, its impact on the ease of use of the hedge trimmer is not at all to be neglected. The heavier the hedge trimmer, the harder it is to hold in the air and can wear you out quickly even if you are experienced. The lighter models are easier to use and handle, but are generally less powerful.

Leave a Comment

Your email address will not be published. Required fields are marked *