The garden, the vegetable patch, those fabulous places where life thrives and which provide us with plenty of vitamins. It is still necessary to be able to water properly. Rainwater harvesting systems have taken the shelves of DIY stores by storm, but in use, we quickly realize that filling the watering can is a chore that we could do without.
Installing a pump will allow you to easily and quickly exploit the water you have collected, or a well on your land. Some water pumps are also great for emptying a swimming pool. Depending on the case, it will be necessary to prime the pump or to find the fittings corresponding to the inlet diameter and that of your pipes.[amazon bestseller =”Water Pumps” template =”table”]
The Best Water Pumps
1. Einhell GH-DP 7835 780 W Dirty Water Pump
Are you looking for a water pump to water your garden? The Einhell brand has what you need. They have developed a pump dedicated to this application. Very useful if you have a rainwater collector. It cannot be remembered enough that watering with running water is a waste of resources.
The pump is equipped with an ergonomic carrying handle for easy movement and installation at the desired location. You will have a screw cap at the connection point of your hose. Use a classic fitting to come and connect your hose.
In a few seconds, you can water your vegetable garden effortlessly. A simple current supply is enough to supply the pump which is equipped with an on / off button. The PVC casing gives you excellent resistance. When you know how tough outdoor tools can sometimes be, such strength is always a good thing.
The major drawback is having to prime the pump, which is not automatic. This means that your pump should run with the presence of water from the start. If it runs empty, we say that it defuses itself and therefore will no longer suck water. You will need to fill your pump and use the suction hose with the non-return valve. Fill the pump and hose, then submerge the hose in water and start the pump.
Also be careful not to block the water outlet for too long. Since it is up to you to turn the pump off manually, when you have finished watering, remember to turn it off immediately.
One appreciable thing is that this pump has sufficient power to lift water from a moderately deep well. By immersing the suction hose in water (after priming), you can exploit this natural resource up to about 10 meters.
2. Karcher BP 3 Home and Garden Pump
A drainage pump with several uses. The model proposed by Kärcher is used for pumping clear water, not to be confused with a gray water pump which can also suck water intended for sewers, containing solid elements.
This pump is capable of emptying your cellar, your crawl space and even your pond. The residual water height is barely 1 mm. All you have to do is wipe off! With its stainless steel body, its resistance and longevity are exceptional, the brand being used to providing robust equipment.
It is supplied with quick couplings to connect pipes and hoses according to your case.
You can control it manually or, on the contrary, let the automatic mode take care of it. All you have to do is set a trigger water height using the sensor provided for this purpose and let it take control. You will then have a water height between your setting and the minimum 1 mm of suction.
It is capable of emptying 3300 liters per hour. Other applications can be found for this type of pump. If you are looking for a surface pump, know that you can completely immerse this pump in your rainwater collection tank to be able to easily fill your watering can or connect an automatic watering system to it. With a delivery head of 9 meters, you have everything you need in your hands.
You will still have to be careful of the pressure. The pump continues its action no matter what. You should therefore be careful not to slam the pump while blocking the outlet. The water should flow continuously. You can, of course, connect a tap or a nozzle to water your garden and concentrate the flow of water, but never stop its course, your hose could explode and injure you.
3. Makita PF1110 240 V Submersible Drainage Pump
The Japanese brand Makita has developed a cellar pump that is capable of performing almost any function. This pump has a stainless steel body to make it ultra resistant and allow it to face all situations calmly.
With a power of 1100 W, it can easily suck a large volume of water in a short time. The maximum flow rate is 15 m³ / h, or 250 liters per minute. To represent the volume of water to you, the Makita PF1110 can empty your tub in a minute.
What makes it particularly versatile is its delivery height of 10 meters. For example, with a suitable base, you can draw from your well without worry, even if it is deep enough, enough to benefit from a natural resource with disconcerting ease.
The vortex turbine creates a very powerful vacuum and the internal mechanism is optimized to give it the possibility of sucking in charged water. So you can use it without fear, even if there are solid bodies or fibers in the water.
The power cord is 10 meters long. On paper, you might think that’s enough, but there are many applications where you will need to use an extension cord. In this case, be very careful to keep the connectors out of reach of the water at the risk of finding yourself in mortal danger. A longer cord would have guaranteed to adapt to all cases.
Also note that the pump is started from 5 cm of water, so you will have a large amount of liquid left if you have a flood in your cellar, unless you have to resort to a backdoor to force operation.
4. T.I.P. 30111 GP 3000 Inox Stainless Steel Garden Pump
The advantage of a water pump for gardening is undeniable. With the TIP 30111 GP 3000, you will have access to a machine of formidable efficiency.
Like other models, it consists of a stainless steel body to give it foolproof robustness. Its biggest strength is the self-priming. You will not have to face the difficulty of not being able to start the pump, or an unexpected stop of the suction. Here, you just have to fill the pump body using the filling plug, then start (with the suction pipe submerged).
The suction hose is 4 meters long to give you enough soft to reach the point of draw. You can completely change it for a longer one while respecting the diameter of the pipe. Just like the original one, take a pipe with a non-return valve to prevent backflow into the source when the pump is stopped.
With its reasonable power of 550 W, its consumption remains easily controllable. Conversely, your flow rate will be limited to 2950 liters per hour, more than enough for a pump application to water the garden. To have access to a higher flow rate, you will need to buy a cellar pump.
Thanks to its high pressure, you can connect it to a sprinkler system with several outlets that run through your entire vegetable garden . Such a system will simplify your life and put the odds on your side to optimize the growth of your plants in order to maximize your harvests.
Best of all, if you have a pond or a swimming pool, you can use it to drain the water and renew it more easily and quickly than with a conventional system. All you need to do is place your suction hose in the basin and let the magic work.
5. GARDENA Comfort 4000/5
Gardena has long been popular with home gardeners. Their range of products is rich enough to cover all the needs of the garden. They produce a powerful, compact and robust irrigation pump.
Its 800 W power provides it with sufficient suction force for all possible applications for your outdoors. For example, if you want to renew the water in your pool or empty your pool, it is capable of doing you a proud service. This versatility is enough to place it ideally against the competition.
Comfort has been specially designed for this pump. With rubber feet, a flexible rotation system and quiet operation, it will quickly become your best ally. The German brand relies on the quality of manufacture and the long duration of its equipment.
The maximum flow rate is 3600 liters per hour, so you won’t have any problems there. Its high pressure of 3.6 bars also allows you to connect an automatic sprinkler system and save you this trouble. This will optimize your harvest by constantly providing water to your plants, especially during heat waves.
One point that will delight you, the pump is primed automatically. You will only have to fill it before switching it on and benefit directly from its suction.
The kit is supplied with a 20 m hose with a 13 mm diameter and a 3.5 m suction hose with non-return valve . You can move it easily thanks to the ergonomic handle and its reduced weight of 12 kg.
A minor detail to note, the suction hose is flexible and light, causing it to float in water if not fully submerged. Be sure to insert it into the water, see putting a weight or a rock on it to keep it at the bottom and ensure continuous operation.