Shower Trays

7 Best Shower Trays of 2021 (Reviews & Buying Guide)

The redesign of the bathroom is an ideal chance to renovate the sanitary services, which have undergone major improvements in both design and materials in recent decades. If the forms were more or less similar in the past and porcelain was the only or virtually the only commodity used in the manufacturing of sanitary ware, the possibilities for choice have grown greatly today. In specific, we will concentrate here on the shower tray, the “floor” portion on which the shower enclosure is mounted, which is normally sold separately. Here are the best shower trays.

How To Choose A Shower Tray?

Dimensions and shape

If we are going to select a new shower tray, the size and shape of the shower tray are the first thing to pay attention to. In fact, we do not necessarily have to select a new shower tray of the same size as the old one: for example, if we have room available and the shower is not obtained in a niche, we may choose to adjust the size of the basin and thereby obtain a more or less spacious shower than before at the end of the job. Three possible types of a shower tray are available: square, rectangular and with a curved corner. The minimum and maximum dimensions of each one of these versions are presented below:

  • Square shower trays: from 70 to 120 cm
  • Rectangular plates: 60 to 90 cm on the short side, 80 to 180 cm on the long side.
  • Curved corner plates: if the sides are 70 to 80 cm equal, if the sides are 70-80 to 90-120 cm asymmetrical.

If one can see, the options are numerous, and it would not be difficult to locate a shower tray of the perfect size and form.

Height

The third dimension to be taken into account is the height of the shower tray: it is accurate that all shower trays had a height of more than 10 cm in the past and were often meant to be mounted on the floor, but it became possible to make much thinner shower trays with the introduction of materials other than ceramics. Today, it is very common to see shower trays that do not exceed 2 cm in height, and can usually be mounted on the ground (thus leaving the step, while incredibly low) or at ground level. (in other words, at the same degree as the tiling).

Colors and materials

Which fabrics are today’s shower trays? There are several options: look at them one at a time and stress their benefits and drawbacks.

Porcelain

Obviously, porcelain is not out of use: it remains throughout vogue in the manufacture of moderate-cost versions, though lines are fluid and voluminous because of the properties of this clay substance baked in the oven. Porcelain is usually white and bright, hygienic, mildew-resistant and easy to scrub. The height of porcelain shower trays is still considerably higher than most other material, so it is very uncomfortable to manage during construction.

Resin-stone mixed

This ultra-modern hybrid material incorporates a rugged, strong vinyl resin with pulverized stone qualities. The stone used may be of various types: the most valuable variant is marmorésine, which mixes resin and marble. The application of stone in the mix makes for a wide range of types and colours, reminiscent of the natural colors of the rock, as well as their roughness. The resin and stone showers are molded to allow for very low geometric lines.

Plastic 

ABS plastic is the cheapest affordable, lightweight and simple to mount, durable and easy to clean. It makes a range of shapes and colors thanks to its flexibility, also with clean and geometric lines of a modern taste. The efficiency is an unquestionable plus, since it gives the bathroom a touch of elegance without needing significant expenditures, but the quality of this material is considerably smaller than that of other materials: plastic can steadily yellow over time.

Slate

The precious material, on the other hand, which has a natural history in its entirety is slate: this sedimentary iron-gray rock, with its natural stratified crust, is good to the touch and not slippery except when wet. Slate shower trays need to be properly assembled and cleaned: in particular, acid-based detergents, whether industrial or DIY, are banned (muriatic acid, limon, vinegar). It recommends instead the use of Marseille soap, denatured alcohol (traditional flowers, to be understood) and baked soda.

Installation of the device

Two separate methods of mounting a shower tray have already been mentioned: over ground or low on the ground. The distinction between the two modes is evident already in the word, so let’s see more.

Above ground

The above-ground installation is the classical installation in which the shower is mounted above the tiled floor, often on a specially constructed masonry stand and shielded in place with a large dose of silicone. From the point of view of construction, it is definitely desirable because of its simplicity: it is not important to strip the tile or the section of the tile. Thus, it is the perfect option, whatever the hetitude of the shower tray, for simple and cheap restoration or replacement.

Yeah, since the downside is precisely that: simply, from the surface, the shower tray forms a phase, more or less marked by the height of the tray. This is why a shower tray above the ground is not the best option for older people in the bathroom or people with serious mobility issues who benefit from a ground floor installation.

Floor recessed

Like the name suggests, a flush shower with the floor would not change the height of the floor, being at the same height as the tiles. This is not the way to mount any shower tray: its height must be very short, between 2 and 3 centimeters. Flush shower tray Installation is therefore a little more difficult than installation on the concrete, whether it is a new build or a drastic renovation: it is important to strip the tiles from the position on which the tiles must be mounted and in some cases, to scrape even a small portion of the tile. Therefore, it is highly recommended that an experienced installer update.

No-slip treatment

One of the issues with the shower tray (and even the bathroom) is slippage: the wet surface can be very slippery particularly in the presence of dissolved soaps and shower gel. Under these circumstances, it may happen that you go accidentally, lose equilibrium and crash seriously. Slip-resistant shower tray A easy alternative to this issue is to use the slip-resistant platform: these accessories are made of plastic, silicon or wood and reduce the risk of unexpected slips. If we wish, however, we can use a tray for its non-slip properties, whether for the natural qualities of the ingredient, or for the application of special treatments on the pavement, if we adjust the shower tray.

Materials non-slip

The various fabrics that can be made from a shower tray all have different qualities, including slipperiness. The most “dangerous” are, without a doubt, porcelain and ABS plastics, two very smooth fabrics that can disturb the equilibrium of soap and water. Slate has a rugged texture, as we said, that helps maintain a firm support, even in the absence of special anti-slip treatments, and this also applies to many models of mixed-resin shower trays and stones.

No-slip treatment

If during development a shower tray has undergone special non-slip surface treatment, it will be specifically defined in the product specification. The procedure itself is not so difficult that DIY application kits are already available on the market. They need a transparent cover to the surface that is rough and facilitates water movement from below the foot.

What Is The Best Shower Tray

1. DreamLine SlimLine Single Threshold Shower Base in White

DreamLine SlimLine Single Threshold Shower Base in White | DLT-1136480

The textured floor surface of SlipGrip provides slip resistance to safety. Glossy acrylic finishing protection for easy maintenance of stains. This shower pan is made of fiberglass reinforced acrylic and coated in cream. In addition to the neutral color biscuit, the DreamLine SlimLine is available in many shades to complement your bathroom. The normal height of the foundation is 2-3/4 cm and the overall interior measurements are 48 cm wide and 36 cm deep.

The drainage is centered from left to right and the drain is just 15″ away from the back. This shower pot is not provided with a drain, so you have to buy it separately. For many factors, DreamLine DLT-1136480-22 is a top subset of this list base. It is robust and intended to supply a low profile layout, reliability and trendy look to the shower base. It is pre-sloped so that you can open it or finish it as you want.

2. PROFLO Single Curb Slip Resistant Shower Pan

PROFLO PFSB3232WH PROFLO PFSB3232 32' x 32' Single Curb Slip Resistant Shower Pan for Alcove...

ProFlo PFSB3232WH is a stand-alone shower foundation that requires no assistance or is connected to another structure. The base type is a rectangle with a drain in the centre. This ensures optimum comfort when in the shower and also avoids the loss of water. The drainage enables the drainage of water while showering. It is made of long-lasting composite and has a non-porous surface that makes it resistant to heat, shock and stain. It also has a slip-resistant surface which prevents a shower from dropping.

3. Swanstone Right Hand Drain Shower Base

Swanstone FR03260RM.018 Veritek Right Hand Drain Shower Base, 60-in L X 32-in H X 4.3125-in H,...

Swanstone FR-3260L is made of Veritek plastic with no surface covering to resist marks or cracks. The containing substance is extremely durable, non-absorbent, and can not be molded or mildewed. Easily blend into your right-hand drainage toilet. Accessible in cream, elegantly decorating every bathroom. Other features include options for colour white, bone and biscuit. The shower pan is a single threshold device with tile flanges on three sides, making it easy to mount and waterproof along the alcove’s side walls. The top of this unit surface is galvanized, and this gives it the grip to avoid slippage that is lethal.

4. Tile Redi USA P3660C-SCSQBVZ Redi Base Shower Pan

Tile Redi USA T3660C-SCDNBVZ Redi Trench Shower Pan, 60' W x 36' D, Brushed Nickel

Tile Redi shower pans come with a range of standard sizes, drainage locations, and drain/plate combinations in certain standard versions. Due to their advanced one-piece nature, they are leak-proof and are made from waterproof materials which require no additional densifier. Our products help you to get the design and installation you want without breaching your budget. Both our goods are ready for use with tiles, which ensures you can set tiles on the leak-proof surface directly. Both versions have the best specification features from Tile RedI shower cups. The ready-to-install surface helps you to position tiles directly on the surface of the shower pot without any planning.

5. Schluter Kerdi Wall Line Drain Shower Tray

Schluter Kerdi Wall Line Drain Shower Tray 55' X 55' KSL1400S by Schluter Systems

This shower tray is made of polystyrene for extra long life. It is inclined and comes with a waterproofing membrane that is already mounted. Since this shower tray has a slope, it’s a basic DIY project that can be run over a weekend. It comes in 55″ by 55″ regular format, but if you need a smaller version, cut the corners. The side has a cutout which allows you to install a drain in your shower.

6. KERDI-SHOWER-ST – 32″ x 60″ – Shower Tray

KERDI-SHOWER-ST - 32' x 60' - Shower Tray - Off-Center Drain Placement - 1-1/2' Perimiter Height

The Schulter Kerdi shower pan is an outstanding drainage system that helps you to set up your shower in several ways. It is easy to use and contains instructional videos and CDs. It can be customized to meet the bathroom needs in a variety of settings. This pan is completely waterproof, so after a shower you won’t have to think about watermarks. The shower pot can be used with KERDI-Drain floor drains so there is no need for a morter to customize this shower receiver. It also flawlessly blends with KerDI shower curbs, ramps and drainage kits.

FAQ

Where can I purchase the shower tray?

  • There are several options to buy a shower tray. First of all, we want to discuss the sanitary shops, which remain the best place to find qualified advice and order home delivery and installation if you would like to employ a competent installer.
  • Buying from big DIY chains is possible too, particularly when you already have a good understanding of which sort of shower tray you want and intend to install your own or trusted plumber.
  • A third alternative is internet shopping. The main advantage is that the price is always considerably cheaper than in-store shopping. Clearly, the downside is that you cannot see the shower tray live, check its tactile qualities and true colours. It remains an outstanding option if you wish to save both on buying and on installation as much as possible.

Where am I going to place my shower tray?

As far as the water drain tube can be maintained and the running water tube can be attached, the shower tube can be mounted wherever you choose. Of course, the quickest, safest and cheapest option is to reuse the room already used by the old shower tray and prevent further work to stretch the drainage tube etc.

When can the shower tray be installed?

Before laying the tiles, the shower tray should ideally be placed, if you want to fill it with the floor or place it above the floor. This is not necessarily necessary, of course, since not all construction programs require floor repairs.

It should always be noted, particularly if you are required to work on an existing surface, that the duvet can only be protected after adequate drainage link and tightness tests have been carried out: the water could contribute to water contamination and its resolution would entail demolition of the whole tub.

Who puts up the shower tray?

If you have one, you should call your trustworthy plumber to mount the shower tray. Another choice is to call specialist plumbing firms, which provide the construction service nearly always in addition to sales (at an additional cost, of course).

How do your shower tray cleaned?

The cleaning of the bathroom shower is an obviously easy subject, but it must take the characteristics of the various materials into account. We must know what sort of shower tray is mounted in our bathroom and know the most appropriate items to clean it. This is a very short summary of the guidance:

  • Porcelain: bicarbonate and white vinegar, lemon, ammonia dissolved
  • Mixed resin stone: purely neutral detergent without vinegar, citrus or other acids, sponges or brushstrokes.
  • Plastic ABS: no solvents, no sponges and brushes neutral, no solvents
  • Slate: Marseille soap, alcohol denatured, baked soda.

It is a smart idea to ventilate the bathroom after the shower not only by leaving the door open but also by shutting the window for at least 10 minutes in order to avoid mold formation. The effect is the gradual evaporation of the water from the shower tray and, commonly speaking, a return to usual air moisture levels.

Leave a Reply

Your email address will not be published. Required fields are marked *